Anntlent AN-USF5-01 Panduan Pengguna - Halaman 4

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Pemanjang Anntlent AN-USF5-01. Anntlent AN-USF5-01 15 halaman. Cell phone signal booster

2．AC/DC Power Adaptor. 3.Screws Mounting Kits. 3. User manual (this document).

(2) Booster interface description:

①Manual gain control knob and LED light：

of the corresponding frequency band .The corresponding LED on the right is used to indicate the

following different working conditions of the booster.

LED Indicator

LED LIGHT

②Power supply jack:

③INDOOR and OUTDOOR port：

antennas.

(3)Antennas and Cables:

In order to use the Booster, you still need the corresponding indoor antenna 1pcs,

outdoor antenna 1pcs, outdoor cable 1pcs and indoor cable 1pcs.

Antennas and cables kitting information are as follows

Booster working conditions

Continuous GREEN @normal；

Twinkly GREEN @input signals may be not enough；

Continuous YELLOW @ stronger input signals, AGC is working；

Twinkly YELLOW@ self–oscillation happen ,AGC is working.

Continuous RED@ power supply is shut down；

Twinkly RED@ self–oscillation happen but power supply is NOT shut down.

The booster uses a power input range of DC 5-12V.

The two ports are used to connect outdoor and indoor

You can manually rotate the knob to adjust the gain

4 / 14