Anoa EX Panduan Pengguna - Halaman 11

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Skuter Anoa EX. Anoa EX 15 halaman. Skutis

Halaman Cetak

1. Technical Specifications

How to use the product

Speed

8) How to control

Speed unit

the dashboard

Battery remaining

(1) Adjusting the speed mode

Change the speed mode when the dashboard is on. To display the current speed mode,

press

. The number for the speed mode will start blinking. Then press

times to set the speed (L1 – low speed, L2 – medium speed, L3 – high speed). Press

to confirm.

* Please note, that the slow start setting P7 (start mode) does not work if you selected

speed mode L1.

* When selecting the L3 speed mode (high speed), during full acceleration the speed

displayed on the dashboard may temporarily differ to the actual speed.

(2) Mode settings

Each time you press the

button

briefly, the mode changes to the next

mode.

Mode

Description

Current mileage (Press

TRIP

and hold the mode button

to set "0")

ODO

Total mileage

CHA

Not used

VOL

Current voltage(Volt)

DST

Not used

E l a p s e d t i m e , s i n c e

TIME1

dashboard was switched

TIME2

Not used

* Note: The voltage displayed in VOL mode

has about 1V to 2V difference from the

actual batter voltage.

Anoa EX / EX+ User Manual

Speed mode

Power button

Accelerator

Mode button

Speed mode

multiple

Information

(3) Returning to the main screen after setting details

Press

again to finish all settings and

return to the main screen.

(4) Detail functions

Mode

Display values and settings

9 (unalterable)

43.0 (unalterable)

15 (unalterable)

0 (fixed)

Speed display: Km/h(0), mp/h (1)

Start mode: Accelerator start (0),

start after kicking (1)

Cruising mode (auto riding):

Off(0), on (1)

Start speed: Power start (0), slow

start (1)

Max. speed setting: 1 to 100%

Electric brake power: Off (0),

medium (1), hard (2)

(5)

Press

P0 mode (detail function settings) > Press

P0 mode and P9 mode >Press

When changing the setting value press

setting value. > Press the

the value > Press

again to confirm all new settings.

Ex) P0 default

value setting

(6) Features of cruise mode

The cruise control function allows you to

maintain the riding speed automatically.

This is convenient for the rider for long

distances and has the advantage of

saving battery consumption.

* Starting the cruise function

a. Select the cruise mode before riding,

as explained in section (5) above.

b. If the throttle is kept at the same

acceleration for about 7 seconds, the

cruise mode will start automatically.

* Ending the cruise function

When you hold and release the brake

while the cruise mode is running, the

cruise mode is automatically cancelled.

* Precautions when using the cruise function

Warning

For your safety, be sure to travel in a

position where the brake can be applied

immediately in order to respond to

any unforeseen incidents. in order to

respond to any unforeseen incidents.

simultaneously for about 2-3 seconds to enter the

to move between

to change setting value >

button to change the

to increase and

to decrease

simultaneously for about 2-3 seconds

(7) Adjusting the intensity of the

electric brake

The Anoa EX / EX+ is equipped with a physical

brake for the front and rear wheels, which can

be activated by pulling the physical brake lever

on the handle. Additionally, the electric brake

can be activated in the P9 detail function settings

on the dashboard. If "0" is selected, the electric

brake is off, "1" will assist with medium intensity

and "2" with strong intensity.

* The electric brake will not operate,

when the battery is fully charged

Do not use the electric brake immediately

after full charging. For your safety and to

enhance the lifetime of your battery, it

is recommended that you do not use the

electric brake with a fully charged battery.

Only use the electric brake, when more

than 5% of the battery capacity was used.

Anoa EX / EX+ User Manual

Warning