Anoa EX Panduan Pengguna - Halaman 6

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Skuter Anoa EX. Anoa EX 15 halaman. Skutis

Halaman Cetak

1. Technical Specifications

How to use the product

1) How to assemble

Anoa EX / EX+ User Manual

(1) Unpacking the product

Warning

1. Raise the handlebar first, then lift the

body (deck part) with both hands and lift

it slowly to prevent damaging the folding

part.

2. Caution: The inner shaft may be damaged

due to the heavy load, when only lifted by

the handlebar.

(2) Assembling dashboard

1. The dashboard is not attached to the

product at first.

2. Use an Allen key inside the dotted circle

to release the screws.

3. Adjust the position of the dashboard as

shown in the picture. Make sure that

there is sufficient space between the

finger throttle and the front wheel disc

brake lever so that you can use both

quickly and conveniently. Then tighten the

screws again with the Allen key to finish.

2) How to unfold your skutis

Folding lever

height adjustment

lever (QR lever)

Fit to the height

adjust hole

Folding lock

(1) Raise the front bar

To unfold, push the folding lever down

and pull the handlebar up. After the

handlebar is unfolded, raise the folding

lock in the direction of the arrow and fix

it firmly.

(2) Adjusting height of handlebar

Warning

Unlock the height adjustment lever

(QR lever) and adjust the height

of the handlebar. You can choose

between three different heights. After

adjustment, the QR lever must be

locked again.

(3) Unfold the handlebar

To unfold the handlebar, raise it in

the direction of the arrow until it is

locked automatically. After unfolding,

make sure that the folding lock of the

handlebar is properly inserted in the

direction of the arrow as shown in the

picture below.

Anoa EX / EX+ User Manual