Anolis ArcWash Recessed 136 RGB Panduan Pengguna - Halaman 5

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Peralatan Pencahayaan Anolis ArcWash Recessed 136 RGB. Anolis ArcWash Recessed 136 RGB 19 halaman. Rgb

Halaman Cetak

transport handles.

When choosing the installation-spot, please make sure that the device is not exposed to extreme heat, moisture or dust.

There should not be any cables lying around. You endanger your own and the safety of others!

The minimum distance between light-output and the illuminated surface must be more than 0.8 meter.

Make sure that the area below the installation place is blocked when rigging, derigging or servicing the fixture.

Always fix the fixture with an appropriate safety rope. Fix the safety rope at the correct holes only.

Only operate the fixture after having checked that the housing is firmly closed and all screws are tightly fastened.

The maximum ambient temperature 40° C must never be exceeded.

Operate the device only after having familiarized with its functions. Do not permit operation by persons not qualified for

operating the device. Most damages are the result of unprofessional operation!

Please use the original packaging if the device is to be transported.

Please consider that unauthorized modifications on the device are forbidden due to safety reasons!

If this device will be operated in any way different to the one described in this manual, the product may suffer damages

and the guarantee becomes void. Furthermore, any other operation may lead to dangers like short-circuit, burns, electric

shock, etc.

3. Description of the device

1 - Moving head

2 - LEDs

3 - Arm

4 - Control panel

5 - Base

Control board

12 - Display

13 - Mode-button

14 - Enter-button

15 - Up-button

16 - Down-button

Rear panel of the base

6 - 3-pin DMX output

7 - 3-pin DMX input

8 - Transport handle

9 - Fuse holder

10 - Power cord

11 - Power switch