Anolis ArcPower 72/K2 Panduan Pengguna - Halaman 3

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Catu Daya Anolis ArcPower 72/K2. Anolis ArcPower 72/K2 20 halaman.

FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY

1. Safety instructions

Every person involved with installation and maintenance of this product has to:

- be qualilfied

- follow the instructions of this manual

Be careful with your operations. With a high voltage you can suffer

a dangerous electric shock when touching the wires inside the unit!

This product has left our premises in absolutely perfect condition. In order to maintain this condition and to

ensure a safe operation, it is absolutely necessary for the user to follow the safety instructions and warning

notes written in this manual.

To prevent from danger of accident ,the device has to be fixed on flat, non-f lam-

mable surface in compliance with the installing instruction included in this manual.

Important:

The manufacturer will not accept liability for any resulting damages caused by the non-observance of this

manual or any unauthorized modification to the product.

Always ground the unit.

The electric connection, repairs and servicing must be carried out by a qualified employee.

Do not connect this unit to a dimmer pack.

Use a source of AC power that complies with local building and electrical rules.AC power has to have both

overload and short circuit protection

This product was designed for indoor use with Luxeon K2 LED´s modules only.In case of connecting

1W LED´s modules these modules will be destroyed!

If the unit has been exposed to drastic temperature fluctuation (e.g. after transportation), do not switch it on

immediately. The arising condensation water might damage your unit. Leave the unit switched off until it has

reached room temperature.

Avoid brute force when installing or operating the unit.

When choosing the installation-spot, please make sure that the unit is not exposed to extreme heat, moisture

or dust.

Only operate the unit after having checked that the housing is firmly closed and all screws are tightly fas-

tened.

The maximum ambient temperature 40° C must never be exceeded.

Operate the unit only after having familiarized with its functions. Do not permit operation by persons not quali-

fied for operating the unit. Most damages are the result of unprofessional operation!

Please use the original packaging if the product is to be transported.

Please consider that unauthorized modifications on the unit are forbidden due to safety reasons!

Unplug mains lead before opening the housing!

BEFORE YOU INITIAL START - UP!

CAUTION!