Dryco Pool Cover Drain Kit Manual - Halaman 3

Jelajahi secara online atau unduh pdf Manual untuk Peralatan Pencahayaan Dryco Pool Cover Drain Kit. Dryco Pool Cover Drain Kit 6 halaman.

Step 10: Using a utility knife,

carefully cut the cover from

inside the reservoir and discard.

Step 13: Do not over tighten this

connection. Make sure that the

pipe is heading down toward the

bottom of the drain like shown.

Step 11: Take the drain guard and

install it on the reservoir with the two

long stainless screws. Tighten the

screws down and then back them out a

half turn. This will allow room for

expansion in freezing conditions.

Step 12: Fold the cover back to

expose the bottom of the drain.

Take the 1" flexible pipe and

screw the end with the male

adapter into the threaded port in

the reservoir. Do not cross

thread. Teflon tape has been

installed on the threads to seal

the connection. If the hose is

removed at anytime from the

reservoir, the tape must be

reapplied.