Anova BRP122 Petunjuk Perakitan - Halaman 2
Jelajahi secara online atau unduh pdf Petunjuk Perakitan untuk Perabotan Luar Ruangan Anova BRP122. Anova BRP122 2 halaman. Ultra hoop bike rack extension ultra triangular bike rack extension
Halaman Cetak
4. Remove one of the Rack Ends from the Bike Rack that you want to extend. Save the hardware that is removed.
Remove one Rack End from
the Bike Rack to be extended
5. Place the Rack Center and Rack Extension at the end of the original Inner Rack. Fasten the Rack Center to the Inner Rack using
the provided 1.5" Bolts, Flat Washers, and Hex Nuts.
Rack Center and
Rack Extension
6. Replace the original Rack End onto the End of the Rack Extension using the original hardware and tighten all hardware.
Original Rack End
and Hardware
7. Retighten all hardware two weeks after initial assembly.
•
Furniture must not be used other than for its intended purpose and should be inspected regularly for loose,
missing, or broken hardware, and general instability.
•
Furniture that is damaged or appears to be unstable must be removed from service and be repaired or replaced.
wArnInG
•
Repairs must be made using only factory authorized parts and methods.
cAre And
•
Do not drag the assembled unit across any surface.
mAIntenAnce
•
This product requires only periodic cleaning with a sponge and a solution of mild detergent and water to
remove surface dirt. Do not clean with a solvent or petroleum based products.
211 No
St. Louis, MO 63141
Hex Nut and
Flat Washer
rth Lindbergh Blvd.
1.5" long Bolt
and Flat Washer
Rack Center
Flat Washer
tel: 888.535.5005
web: anovafurnishings.com
Packaging cardboard
or other soft surface
Rack End and
Inner Rack
Hex Head Bolt
Flat Washer
Nut
Inner Rack
10/2012