Anova MG3514 Instruksi dan Panduan Pengguna - Halaman 7
Jelajahi secara online atau unduh pdf Instruksi dan Panduan Pengguna untuk Gergaji Anova MG3514. Anova MG3514 19 halaman.
Halaman Cetak
3. SYMBOLS ON THE MACHINE
For safe operation and maintenance of your machine, please pay attention to the symbols that are
embossed on the machine.
(a) The place where to refuel the gasoline mixture.
Position: On the fuel tank cap
(b) The place to refuel the chain oil.
Position: On the oil cap
(c) Indication relative to the switch. If the switch is in position "0" the machine will
turn off. Position: Rear Left of Machine
(d) Starter. Pulling the choke out closes the air intake. Position: Rear Right of
Machine
(e) Oil regulation terms.
"MIN" is the direction to reduce the lube oil output.
"MAX" is the address to increase the lube oil output.
(f) Position of high speed adjusting screw (H)
Low speed adjusting screw position (L)
Idle adjusting screw position (T)
Place on the machine: rear left of the machine.
(g) Chain brake. Forwards the chain is braked. Towards rear the chain is loose
and operative.
(h) Manual pull start.
7