FOVNO RS-03B3 Petunjuk Manual - Halaman 6

Jelajahi secara online atau unduh pdf Petunjuk Manual untuk Aksesori Mobil FOVNO RS-03B3. FOVNO RS-03B3 10 halaman. Sucker bike rack

Installation and Removal

Crank ﬁxing

· To avoid the cranking or bumping of the cranks in the process of

driving, the crank should be ﬁxed to the bike frame with crank strap.

· The crank should be ﬁxed before the bike is put on the rack, to

prevent the crank from rotating and scratching the paint.

Choose the right place

· The front rack should be mounted on a ﬂat place, do not install the rack on the advertising

area, on the glass, or on the seam.

· Place the bike handlebar forward when ﬁxing bike on the car roof.

Rack installation method

· Clean up the car roof and suction foot with water and towel.

· Wipe the suction foot and car roof surface with a clean wet towel, prevent the roof rack

from sliding o due to accumulated water. Then put the roof rack on the chosen location,

press the suction foot vertically against the car roof with one hand while the other hand

pushes the cylinder rod to extract the air until the white line is in the pump. And make sure

there is no obvious sign of rebound from the cylinder rod. Remove the bike front wheel then

lock the front fork on the roof rack.(The angle of the front fork clamp on both sides of

Three-bike rack can be adjusted depending on the bike model to avoid interference between

the handlebars.)

Press the cylinder rod

Correct

Error

Install the front fork to the fork clamp