DS Produkte Z 09267 Panduan Petunjuk Pengoperasian - Halaman 4

Jelajahi secara online atau unduh pdf Panduan Petunjuk Pengoperasian untuk Peralatan Pencahayaan DS Produkte Z 09267. DS Produkte Z 09267 8 halaman.

Halaman Cetak

Inserting/changing batteries

LED light

You will need 3 x 1.5 Volt bat-

teries of type AAA. They are not

included in the product contents!

1. Screw open the battery compart-

ment on the back of the product.

2. Remove the empty batteries and

dispose of them in an environmen-

tally-friendly manner.

3. Insert 3 x 1.5 Volt AAA batteries.

When inserting batteries, always

make sure that the polarity is cor-

rect (+/–).

4. Screw down the battery compart-

ment securely.

Remote control

The battery for the remote

control

has

inserted. You only have to

remove the transport guard.

1. Push the catch on the battery

compartment to the right using your

ﬁ nger nail and pull out the battery

compartment at the same time.

2. Remove the empty battery and

dispose of it in an environmentally-

friendly manner.

3. Insert a 3 Volt battery of type

CR2025. When inserting batteries,

always make sure that the polarity

is correct (+/–).

4. Place the battery compartment

back into the remote control. It must

audibly lock into place.

Start-up

The product is suitable for use

in wet environments (e.g. vases,

ponds, ﬂ ower beds etc.). Befo-

re use, always ensure that the

battery compartment is securely

screwed down to prevent water

from penetrating the product.

1. Unpack the product contents and

remove any protective foils and sti-

ckers. Check all parts for any da-

mages from transport. Should you

identify any transport damages,

please promptly consult customer

service.

2. Place the LED light in the area to

be illuminated (e.g. vases, shelves,

ﬂ ower pots, pond etc.).

3. Turn on the LED light by pushing

the ON button on the remote con-

trol.

DS Produkte GmbH, Am Heisterbusch 1, 19258 Gallin, Germany

*) Calls to German landlines are subject to charges. The cost varies depending on the

Operating Instructions

4. Select the desired colour or the

desired effect and push the cor-

responding button on the remote

control.

Please note that the colour set-

tings are mixed colours. For this

reason, the colour tints may

exhibit minor deviations. Even

white light is a mixed colour and

thus not a purely white colour

tint!

5. Set the desired colour brightness

using the buttons to increase/de-

crease the intensity of colour.

6. Push the OFF button to turn off the

LED light.

Technical data

Product number: Z 09267

Model number:

Power supply:

already

been

Light:

Remote control: 3 V (1 x 3 V battery,

Disposal

The packaging material is recyc-

lable. Dispose of the packaging

in an environmentally-friendly

manner and make it available to

the collection service for recyc-

lable materials.

Dispose

manner.

not belong in the household

garbage. Dispose of it at a

recycling centre for old electric

and

For more information, please

contact the administration in

your community.

Batteries and storage batteries

must be removed and disposed

of separately before disposing

of the product. To protect the

environment,

rechargeable

not be disposed of together

with normal household waste.

Instead they must be turned in

at appropriate collection points.

Please also observe applicable

statutory provisions regulating

the disposal of batteries.

Customer Service / Importer:

✆

+49 38851 314650 *)

service provider.

U-SLLR01

4.5 V (3 x 1.5 V

batteries, type AAA)

type CR2025)

the

product

environmentally-friendly

The

product

does

electronic

equipment.

batteries

and

batteries

may

Z 09267_V4_02_2016