DS18 LSE-112A Panduan Pemilik - Halaman 5

Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Subwoofer DS18 LSE-112A. DS18 LSE-112A 8 halaman.

1
BATTERY
Professional installation by an authorized DS18 dealer is highly recommended!.
Otherwise, the performance of your new gear may not be satisfactory. In the event
that you decide to do your own installation, please read and follow this manual carefully.
Failure to do so may compromise the integrity of this product, your automobile, and
possibly void the product warranty.
Amplifiers are generally mounted in the hatch/trunk are of a car or SUV, and under or
behind the seat of most pick up trucks. Select a location that will provide adequate
ventilation for the amplifier. Avoid mounting the amplifier with the fins facing down.
The fins should be facing up, either vertically or horizontally. Secure the amplifier with
the screws provided.
Before securing the amplifier, inspect the mounting location carefully to ensure that
you do not drill into or damage any electrical, hydraulic, fluid or fuel lines.
Before you start, disconnect the negative cable from the car battery.
1
Tape up the end so it is isolated from the battery.
Run an appropiate guage wire from the battery to the amplifier. Plan this
2
part of the installation carefully. This cable will carry very high current. If
it should short to the body and it is not properly fused it could catch fire.
3
2
3
4
RADIO
5
6
AMP
7
8