Daintree GE Albeo AHH2 Panduan Instalasi - Halaman 2

Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Lentera Daintree GE Albeo AHH2. Daintree GE Albeo AHH2 3 halaman. Led luminaire heavy industrial high bay lighting

Halaman Cetak
AHH2 LED Luminaire
Albeo
®
Section 1: Unit Installation
Provide at least 12" of clearance from the top of the fixture to any ceiling or surface above.
A
Carefully unpack unit and properly inspect
for defects before installing. Wear work
gloves to prevent dirt and oil from being
transferred to the luminaire.
NOTE: For applications requiring the "R" corrosion resistant finish, use mounting hardware appropriate for the environment
Section 2: Pendant Mounting
A
Attach to
structural
member
pendant mount cover
Attach pendant mount cover to ¾" NPT
conduit with at least 3 full threads of
engagement. Determine rotation of
luminaire and lock orientation in place
with provided set screw.
Single Fixture
Tighten
Attach to
D
screw
structural
Fasten
member
with nuts
Swing luminaire closed and secure with the
slide clip. Lock slide clip in place with screw.
B
Choose a mounting method: chain or cable,
rod mount, or pendant mount.
Fixture Weight
ABR1-Series
Max. Weight (lbs.)
B
Lift luminaire up and hang on pendant
mount cover using hinge piece.
E
Connect the green (ground), black (line)
See Note
and white (neutral) wires of the AC line to
Single Fixture
the similarly colored wires of the luminaire's
lead wire using UL listed wire connectors.
Close junction box.
2
Installation Guide
C
Gray
C
Attach to
structural
AC power cord
member
Feed the AC power lead wire through
the conduit and into the junction box.
Line
Black
Neutral
White
Ground
Green
0-10V(+)
Purple (+)
0-10V(-)
Gray (-)
For dimming options, connect purple
and gray leads to dimming control that
is certified and suitable for the
hazardous locations involved, rated
0-10V min. A 10V signal corresponds
to 100% lumen output. A 0V signal
corresponds to ~10% lumen output.
See Note
Cap purple and gray leads separately
when not used.
Dual Fixture
-10V (+)
0-10V (–)
Dual Fixture
To AC Main
To 0-10V
Dimmer