Daintree GE Current Lumination 22 Series Panduan Instalasi - Halaman 2

Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Lentera Daintree GE Current Lumination 22 Series. Daintree GE Current Lumination 22 Series 3 halaman. Led 120-277v

Halaman Cetak

Installation

Carefully unpack unit from its packaging. Properly

inspect for defects before installing. Wear work

gloves to prevent dirt and oil from being

transferred to the luminaire.

Bend clips

Bend the 4 clips to secure the luminaire in place.

Install the safety cables through the holes on the clips

(per local building codes, safety cables by others).

Electrical Connections

Risque de choc électrique. Couper l'alimentation avant le dépannage ou avant l'installation du produit.

WHITEC

BLACK

GROUND

GREY

VIOLET

Safety cable

WARNING/AVERTISSEMENT

Risk of electrical shock. Disconnect power before servicing or installing product.

120-277V

OMMON

NEUTRAL

UNSWITCHED

LINE

GROUND

DIMMING (••)

DIMMING

0-10V

DIMMING (+)

Install the unit into the reserved hole in the ceiling.

If installing more than one luminaire per room,

follow instructions on the diffuser label to maintain

consistent orientation.

NOTE: Two sets of leads may be provided from the recessed

troffer module labeled "UV" and "WHITE." These may be

connected to the same or separate circuits depending on

customer instruction.