DSC Classic PC580 Buku Petunjuk - Halaman 9

Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Sistem Keamanan DSC Classic PC580. DSC Classic PC580 18 halaman.

Halaman Cetak

PC1555RKZ LED Keypad

Emergency Keys (All Keypads)

PC5508Z / LCD5500Z:

Press both * Keys for two seconds to send a FIRE transmission.

Press both

* Keys for two seconds to send an AUXILIARY transmission.

Press both

* Keys for two seconds to send a PANIC transmission.

PC1555RKZ:

Press the [F]* key for two seconds to send a FIRE transmission.

Press the [A]* key for two seconds to send an AUXILIARY transmission.

Press the [P]* key for two seconds to send a PANIC transmission.

* IMPORTANT NOTE (All Keypads): The Fire, Auxiliary and Panic keys will NOT

function unless programmed by the installer. If these keys are in service and the

installer has enabled audible feedback, holding down the key for two seconds will

cause the keypad sounder to beep indicating that the input has been accepted and

transmission is underway.

System Light (PC1555RKZ):

If the System light is ON, one or more of these conditions could

be present on the system:

System Busy

System Troubles (See "Viewing Trouble Conditions" on page 9).

Alarm Memory (See "Disarming the System" on page 5).

Zone Bypassing (See "Zone Bypassing" on page 8).

Programming The System light will flash when you are

programming access codes, or performing other programming

functions. If someone is programming at another keypad, the

System light will turn ON to indicate that the system is busy.

NOTE: If you have a PC1555RKZ keypad, the System light

acts as a Trouble, Memory, Programming and Bypass

indicator. Unlike the other keypads, these conditions will

only be represented by the System light. Please keep this

in mind when reading other functions in this manual.

Display Lights (All Keypads)

Ready Light

If the Ready light is ON, the system is ready for

arming. The system cannot be armed unless

the Ready light is ON (see "Arming the System"

on page 3).

Armed Light

If the Armed light is ON, the system has

been armed successfully.

Trouble or System Light

If the Trouble light is ON, see "Viewing

Trouble Conditions" on page 11.

Important Note: Test system weekly and have any system trouble conditions corrected by your alarm installer.

PC5508Z LED Keypad

Memory Light

Upon disarming, if an alarm has occurred

while the system was armed, the Memory

light will turn ON (See "Disarming the

System" on page 5).

Bypass Light

If the Bypass light is ON, one or more

zones are bypassed (See "Zone

Bypassing" on page 10).

Fire Light

If the Fire light is ON, a fire alarm has

occurred (See "Fire Alarm Operation" on

page 13).

Program Light

The Program light will flash when you are

programming access codes, or performing

other programming functions. If someone is

programming at another keypad, the

Program light will turn ON to indicate that

the system is busy.

LCD5500Z Keypad

The Liquid Crystal Display (LCD) displays

prompts and system information on two 16

character lines.

If "< >" appears, more information can be

accessed by using the arrow (< >) keys.

Press [<] to see the previous function or item

of information. Press [>] to advance the

display to next function or item of information.

Press the keys on the number pad as

prompted by the LCD display to view alarms

or troubles, to arm and disarm the system

and to bypass zones.

To exit a function and return to the Ready

state, press [#].

To select a function press [ ].