Ansel LAN MODEL Panduan Memulai Cepat - Halaman 3

Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Kamera Keamanan Ansel LAN MODEL. Ansel LAN MODEL 6 halaman.

LAN port located on the Network Camera's bottom and attach the other end to the network

device (hub or switch).

2. (WLAN model only) Attach the SMA antenna

Find antenna in accessory. Attach the antenna to the IP cam

SMA connector.

3. Check the LED ( Front Panel )

The LED is defined to identify LAN/WLAN connection type. When LAN port is connected,

the LED will be green. For WLAN model, if LAN ported is connected, the LED will be

green; if LAN cable is removed; the IP cam will change to WLAN connection and LED

change to orange color.

LED

(Network type)

4. Place the Camera on the table or fix it onto ceiling or wall

Use screws to fix the Network Camera onto the ceiling or wall. You could also put the

Network Camera on the table directly.

5. Attach the power supply

Connect the provided power adapter labeled "5V DC" to the Network Camera connector on

Fixed it by

screws

Microphone