Ansel Pan/Tilt & Dome Type Panduan Memulai Cepat - Halaman 10
Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Kamera IP Ansel Pan/Tilt & Dome Type. Ansel Pan/Tilt & Dome Type 12 halaman. Multi-profile network cameras: pan/tilt & dome type
Halaman Cetak3. Camera administration
When you installed your networked device over your network environment, to start
Network Camera web configuration, you must have the web browsers installed on
computer for web management.
Microsoft internet Explorer 6.0 or higher
-
At first, user may use "IP Wizard" utility to search all networked devices in the LAN.
Use "IP Wizard" to locate IP address
Press "Search" button. IP Wizard will list all networked devices in the LAN:
Wizard function:
The utility featured with "Wizard" function to help user to modify the IP parameters of
the installed network devices. User can step by step to setup IP address, username and
password.
Username and Password:
The networked devices will prompt for User Name and Password. Default username is:
admin, leave password blank.
Note 1: If no IP address is assigned within 30 seconds, the networked device will
automatically assign 192.168.0.100. User may now open your web browser, and key in
http://192.168.0.100
Camera's web configuration page.
Note 2: If you have problem when connecting the network camera to a router, please
read user's manual inside CD, the section "Installation to a router".
After connected to networked device, the device will prompt for User name and
Password. For the first time, please enter: admin as username to continue machine
Web Management.
in the address bar of you web browser to logon Network
10