Ansel 6101 Panduan Instalasi Cepat - Halaman 9

Jelajahi secara online atau unduh pdf Panduan Instalasi Cepat untuk DVR Ansel 6101. Ansel 6101 16 halaman.

4 Channel

Network Video Recorder

Access the NVR with its default IP address

The NVR comes with a pre-configured static IP "192.168.101.50".

However, it is only used when there is no DHCP server presented in

the network. The NVR will turn on its DHCP server function and act

as the DHCP server in the network. To connect to the NVR, use a PC

that is on the same network over a switch or hub, or connect the PC

directly to the NVR using a crossover CAT5 Ethernet cable.

The PC that is connected directly to the NVR (or within the same local

area network) should receive an IP from the NVR. Simply access the

NVR from your web browser with its IP address

Again, you should be prompted for the username and password. En-

ter its default username "admin" and password "admin" and then

click"OK" to enter the system