DAITEM 145-21X Panduan Instalasi - Halaman 8
Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Sensor Keamanan DAITEM 145-21X. DAITEM 145-21X 19 halaman. Outdoor motion detector 2 x 12 m
Halaman Cetak6. Installation
6.1 Testing the radio link
1. Before fixing the detector, place them
close to the fixing point and check the
radio link with the control panel.
If the link with the control panel is correct,
the control panel issues a voice message
identifying the detector activated.
2. Press (> 5 sec.) the "test" button on the
detector, the control panel issues the
following voice message: "beep, test,
detector X (customised message), group Y,
(immediate or delayed or combined)".
"beep, test detector X, group Y,
(immediate or delayed
or combined)"
)
)
)
)
)
6.2 Fixing
1. Drill the fixing holes using the drilling
template provided in the packing box.
Top
Bottom
3. Close
d
the radio
box.
73
2. To fix the back
box on the wall
using wall plugs
and suitable
screws (not
provided).
4. Position the
detection
module on
the back box
then tighten
the screws.
GB
Fastening
screw