DAITEM 171-21X Panduan Instalasi - Halaman 13

Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Sensor Keamanan DAITEM 171-21X. DAITEM 171-21X 18 halaman. Infared motion detector
Juga untuk DAITEM 171-21X: Panduan Instalasi (8 halaman)

Halaman Cetak

6. Maintenance

6.1 Battery low indication

The control panel indicates when

the infrared detector's battery is

low.

To check whether there is a

problem with the detector battery,

press on the detector's test button.

If the test LED indicator lamp no

longer lights up, the lithium battery

should be replaced.

IMPORTANT: the detector's

configuration is saved when the

battery is changed.

6.2 Changing the battery

To change the battery:

1. switch the control panel to installation mode and ask the user to press:

master code

2. Open the detector casing (see § on Opening).

3. Unclip the lithium battery pack.

4. Wait 2 min. before replacing the ﬂat lithium battery.

5. Switch the control panel back to user mode, press:

installer code

IMPORTANT: pull on the tab to remove the lithium battery.

• The lithium battery pack must be replaced by the same type of pack with the

same technical characteristics, i.e. (3.6 V - 4 Ah).

• We advise you to use the DAITEM BatLi25 pack available in the catalogue

in order to guarantee individual safety and equipment reliability.

• Dispose of the waste lithium power pack in an appropriate

recycling bin.

then

installer code