DAITEM SH148AX Panduan Instalasi - Halaman 6

Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Sensor Keamanan DAITEM SH148AX. DAITEM SH148AX 18 halaman. Outdoor ir anti-masking 5 m

Halaman Cetak
GB

4. Parameter-setting

The motion detector is factory-configured
for deterrence (see your control panel
installation guide for system responses).
The alarm level can be changed by resetting
the parameters as shown opposite.
Parameter-setting example: setting the
detector to prealarm level: parameter
number 5, parameter value 2.
Parameter-setting sequence
Parameter N°
Alarm level
Intrusion
Prealarm
5
Deterrence
Warning
Programming
LED on
Programming
LED off
about 10 s.
Programming
sequence
To start,
Press the button
press and
5 times for the
hold until the
parameter
LED goes out.
number
5
Start
Press the
Press
button 5 times
once to
to select the
create a
alarm level
space
20
Parameter value
1
2
3 (factory setting)
4 (function compatible with control panel
versions 2.0.0 and later)
about
5 s.
Press and
Press the button
To end, press
hold until the
1 to 4 times for the
and hold the
LED briefly
parameter value
button until the
goes out
LED goes out
2
about 2 s.
Press the button
End
twice to select the
prealarm level.
about 2 s.
about 10 s.
Programming
LED steadily lit
= parameter
set correctly