DSC PC1550 Buku Petunjuk

Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Papan tombol DSC PC1550. DSC PC1550 17 halaman. 4 digit master code
Juga untuk DSC PC1550: Buku Petunjuk (17 halaman), Buku Petunjuk (17 halaman), Buku Petunjuk (9 halaman), Buku Petunjuk (17 halaman), Buku Petunjuk (12 halaman)

Halaman Cetak

About Your Security System

Your DSC security equipment has been designed to give the greatest

possible flexibility and convenience. Read this manual carefully and have

your installer instruct you on system operation and on which features have

been implemented in your system. All users of this system should be

equally instructed in its use. Fill out the System Information page and store

this manual in a safe place for future reference.

Fire Detection

This equipment is capable of monitoring fire detection devices such as

smoke detectors and providing a warning if a fire condition is detected.

Good fire detection depends on having adequate number of detectors

placed in appropriate locations. This equipment should be installed in

accordance with applicable standards and codes. Carefully review the

Family Escape Planning guidelines in this manual.

NOTE: Your installer must enable the fire detection portion of this

equipment before it becomes functional.

Testing

To insure that your system continues to functions as intended, it is

important that you test your system weekly. See the testing procedure

elsewhere in this manual. If your system does not function properly, call

your installing company for service.

General System Operation

Your security system is made up of a DSC PC1500 or PC1550 control

panel, one or more PC1500RK keypads and various sensors and detectors.

The control panel will be mounted out of the way in a utility closet or in a

basement. The metal cabinet contains the system electronics, fuses and

stand-by battery. There is normally no reason for anyone but the installer or

serviceman to have access to the control panel. The PC1500RK keypads

have an audible indicator (buzzer), a group of zone and system status

lights and command entry keys. The keypad is used to send commands to

the system and to display the current system status. The security station(s)

will be mounted in a convenient location inside the protected premises

close to the entry/exit door(s).

The security system has several zones of area protection and each of these

zones will have one or more sensors connected to it (motion detectors,

glassbreak detectors, door contacts, etc.). When a sensor is in alarm, the

zone of alarm will be indicated on the PC1500RK (zone lights 1 through 6).

Impor

tant Notice

Impor

Important Notice

Impor

tant Notice

A security system cannot prevent emergencies. It is only intended

to alert you and, if included, a monitoring station, of an emergency

situation. Security systems are generally very reliable but they may

not work under all conditions and they are not a substitute for prudent

security practices or life and property insurance. Your security

system should be installed and serviced by qualified security

professionals who should instruct you on the level of protection that

has been provided and on system operations.