Anslut 421-342 Panduan Petunjuk Instalasi - Halaman 9
Jelajahi secara online atau unduh pdf Panduan Petunjuk Instalasi untuk Lampu Kerja Anslut 421-342. Anslut 421-342 9 halaman. Led flourescent tube
Halaman Cetak
Final installation: The existing fitting has electromagnetic ballast
1.
Switch off the mains voltage (230 V).
2.
Remove the starter and insert the bypass in the starter holder.
3.
Insert the LED fluorescent tube in the fitting.
4.
Switch on the mains voltage (230 V).
NOTE: The bypass is included in the final installation kit.
Before final installation – existing fitting
NOTE: The LED flourescent tube will only work after modification of the original fitting. The EMC
characteristics must therefore be rechecked, together with the LED fluorescent tube, after modification of
the fitting. The kit consists of 1 LED fluorescent tube, installation instructions, and bypass for installation
in starter holder (1).
Jula reserves the right to make changes. In the event of problems, please contact our service
department.
www.jula.com
ENGLISH
After final installation – LED fluorescent fitting
1 = Bypass
9