Anslut 001947 Panduan Petunjuk Pengoperasian - Halaman 11

Jelajahi secara online atau unduh pdf Panduan Petunjuk Pengoperasian untuk Lampu luar ruangan Anslut 001947. Anslut 001947 12 halaman. Garden lights

is firmly fixed in the ground. If it is difficult

to put the ground spike in the ground,

make a hole with a poker. The ground spike

must not be pressed down further than to

the recess for the lamp cord.

Connect the lamp to the connection cord

by putting the lamp connector in the outlet

on the connection cord and tightening the

threaded locking sleeve.

Connect the connection cord to the

transformer by putting the connection cord

connector in the outlet and tightening the

threaded locking sleeve.

Plug the transformer into the power point.

FIG. 3

MAINTENANCE

Replacing light source

Disconnect the transformer from the

mains.

Release the diffusor from the socket by

turning it anticlockwise.

Lift off the diffusor.

Remove the old light source.

Insert a new light source of the same

type.

Put the diffusor on the socket and turn it

clockwise to fasten it.

Connect the transformer to the mains.

If one or more lamps do not light up, check:

–

That the mains connection is working.

–

That the lamps are correctly connected

to the connection cord.

–

That the light sources are intact.