Daitsu RTD-75-UT Panduan Servis - Halaman 3

Jelajahi secara online atau unduh pdf Panduan Servis untuk Kontrol Jarak Jauh Daitsu RTD-75-UT. Daitsu RTD-75-UT 11 halaman. Wire remote control

2. Timer ON/OFF

When adjust setting on time or only on time is set, the indicator 'ON' is lighted.

When adjust setting off time or only off time is set, the indicator 'OFF' is lighted.

If timer-on and timer-off timer both set, the indicators 'ON' and 'OFF' will be both lighted.

3. Follow me function

There is a temperature sensor inside the wired controller, after setting temperature; the

detected temperature by this sensor will be compared with setting temperature. The space

of wired controller will be same as the setting temperature.

It is available under cooling, heating and auto mode.

4. ON/OFF indication

When it is on, the icon will be displayed, otherwise it is extinguished.

5. Fan speed indication (For rooftop packages, it is not available.)

There are four fan modes: low, medium, high and auto. For some models, there is not

medium fan speed, and the medium fan speed is seen as high speed.

6. LOCK

When the 'LOCK' button is pressed, the icon will be displayed and other button is unable.

Press the 'LOCK' again, the icon will be extinguished.

7. Temperature display zone

Generally it displays setting temperature, it can be adjusted by press temperature button

▲and ▼. But in fan only mode, the temperature display zone will be blank.

1.3 Introduction of buttons