FoxGate S6224-S2 Panduan Instalasi - Halaman 16

Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Beralih FoxGate S6224-S2. FoxGate S6224-S2 16 halaman.

FoxGate S6200 Series Installation Guide

Power Supply Connection

2.3.5

FoxGate S6200 series use the power is 220VAC. Please read the power input

specification for the detailed information.

AC Power supply connection procedure is described as below:

Fig 2-4 Attaching power cable to FoxGate S6200 series

1. Insert one end of the power cable provided in the accessory kit into the power source

socket (with overload and leakage protection), and the other end to the power socket in

the back panel of the switch.

2. Check the power status indicator in the front panel of the switch. The corresponding

power indicator should light. FoxGate S6200 series are self-adjustable for the input

voltage. As soon as the input voltage is in the range printed on the switch surface, the

switch can operate correctly.

3. When the switch is powered on, it executes self-test procedure and startups.

Caution!

The input voltage must be within the required range, otherwise the switch can be

damaged or malfunction. Do not open the switch shell without permission. It can cause

physical injury.

Chapter 2 Hardware Installation