DSC PowerSeries Lembar Ringkasan Produk - Halaman 10

Jelajahi secara online atau unduh pdf Lembar Ringkasan Produk untuk Unit Kontrol DSC PowerSeries. DSC PowerSeries 20 halaman. Telephone interface & automation control module
Juga untuk DSC PowerSeries: Panduan Pengguna (20 halaman)

DSC PowerSeries Lembar Ringkasan Produk
Step 2 – Schedule [02] Programming – Escort Section [033] to [035]
Schedule [02] will be used for the Night Occupancy Setting (starting at 11:00 pm) and will be programmed
as follows:
Program data [2300] in Section [033] (11:00 pm On Time)
Program data [9999] in Section [034] (no Off Time is required)
Turn Options [01] through [07] ON in Section [035] to enable all days of the week.
Step 3 – Thermostat 1 Options – Escort Section [800]
Turn Option [01] ON to enable the thermostat.
Turn Option [02] ON if an EMS-OTS outdoor temperature sensor is connected.
Turn Option [03] ON if the thermostat will be used to control heating.
Turn Option [04] ON if the thermostat will be used to control cooling.
Turn Option [05] ON so the Day Occupancy Setting will always activate by schedule.
Turn Option [06] ON so the Night Occupancy Setting will always activate by schedule.
Turn Option [07] and [08] OFF as the Away and Auxiliary Occupancy Settings are not being used.
Step 4 – Thermostat 1 Day Occupancy Setting Schedule Assignment – Escort Section [801]
Turn Option [01] ON for the Day Occupancy Setting to follow Schedule [01].
Step 5 – Thermostat 1 Day Occupancy Setting Output Option – Escort Section [803]
Program data [02] for schedule control only. The user will always have manual control as well.
Step 6 – Thermostat 1 Night Occupancy Setting Schedule Assignment – Escort Section [806]
Turn Option [02] ON for the Night Occupancy Setting to follow Schedule [02].
Step 7 – Thermostat 1 Night Occupancy Setting Output Option – Escort Section [808]
Program data [02] for schedule control only. The user will always have manual control as well.
Operation:
At 8:00 am, every day, the Escort will adjust the temperature to the value programmed
for theDay Occupancy Setting and at 11:00 pm the Escort will adjust the temperature to the value
programmed for the Night Occupancy Setting.