Foxpro WILDFIRE Buku Petunjuk - Halaman 11

Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Olahraga & Luar Ruangan Foxpro WILDFIRE. Foxpro WILDFIRE 20 halaman. Digital game caller

FOXBANG sensitivity to high levels is that handling noises, such as banging of

the transmitter case on your firearm stock, may cause unexpected activation of

FOXBANG. For this reason, you should choose the lowest sensitivity that

affords reliable activation from the muzzle blast. FOXBANG is intended to work

when the transmitter is located within about 5 feet of the firearm muzzle.

3.10 Reverse Graphics

For nighttime operation, there may be times where reversing the screen

graphics can be to your advantage. To accomplish this, simultaneously press

the P1 and P2 buttons on your TX-9. To switch back to normal, simply repeat

the process.

If you have trouble reading the text on the screen, you can engage large text

mode on the TX-9. This will display the 3 digit sound ID number along with the

2 digit volume level in large text only (nothing else will be displayed). To

engage this, press Volume Up and Volume Down simultaneously. To switch

back to normal text mode, reverse this process.

4.0 USING AN EXTERNAL SPEAKER

The WILDFIRE is equipped with an External Speaker Jack, which allows you to

connect an additional speaker.

4.1 CONNECTING AN EXTERNAL SPEAKER

The external speaker jack on your WILDFIRE accepts standard 3.5mm plugs.

When choosing an external speaker, it is recommended to use one with an

impedance rating of 8-ohms.

NOTE: Be sure the WILDFIRE is turned OFF before connecting an external

speaker.

To connect an external speaker, plug the connector of the external speaker into

the external speaker jack. If you wish to have ONLY the external speaker

produce sound, you must disable the internal speaker with the "SPKR" slide

switch on the WILDFIRE, as the internal speakers are not disabled

automatically.

4.2 DISABLING INTERNAL SPEAKER

Move the speaker slide switch to the left or "off" position to disable the internal

speaker. To re-enable the speaker later, simply place the slide switch back to

the right or "on" position. By disabling the internal speaker when using an

external speaker, battery life will be extended longer than having both of the

speakers operating at once.

Page | 11