DSG Technology AA9604 Panduan Pengoperasian - Halaman 9

Jelajahi secara online atau unduh pdf Panduan Pengoperasian untuk Pesan suara DSG Technology AA9604. DSG Technology AA9604 20 halaman. Auto attendant

The PBX should be able to transfer the ringing tones from the central office

line to appointed extensions. As shown in Figure 2-1, LINE1, LINE2, LINE3

and LINE4 should be the appointed extensions of your PBX.

The PBX should support standard 2-wired analog telephone lines, which

transmit DTMF signals.

The "appointed extension" connected to the system should be able to handle

either "hunt group" or "spread ringing".

If all ports are busy, the PBX should transfer the call to the operator or a

human attendant.

The system should not be exposed to direct sunlight, nor placed in a high

tempered area.

2-3 Front Panel

Figure 2: Front Panel

(1) POWER (red): Power indicator. The indicator is on when the adapter is

plugged into the DC 12V power socket on the rear panel of the system.

(2) DAY / NIGHT (green): Day/night mode indicator. When the light is on, it

indicates the system is currently in day mode (business hours), and the Day

Greeting will be played for all incoming calls. When the light is off, it indicates

the system is currently in night mode (non-business hours), and the Night

Greeting will be played for all incoming calls.

(3) NOON (green): Noon mode indicator. When the light is on, it indicates the

system is currently in noon mode, and the Noon Greeting will be played for

all incoming calls.

(4) LINE1, LINE2, LINE3, LINE4 (red): Line engaged indicator. When the light is

on, it indicates the line is currently engaged, and the system is answering the

incoming call.

(5) MODES: DAY/ NIGHT/ NOON mode switch. Each press on this switch will

rotate to the next mode, in a DAY-NIGHT-NOON order.

(6) MANUAL / AUTO: This switch selects manual or automatic switching for

DAY/ NIGHT/ NOON modes. Upper position represents AUTO, and the

Chapter 2 Installation