DSLR Pros Cannes HD Edition Aerial Kit Panduan Pengguna - Halaman 7

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Drone DSLR Pros Cannes HD Edition Aerial Kit. DSLR Pros Cannes HD Edition Aerial Kit 12 halaman. Sundance hd edition aerial kit contents list

Halaman Cetak

DSLRPros Carbon Fiber Props are NOT self-tightening.

Gimbal Installation & Removal

It is highly recommended that new pilots remove the lower half of the gimbal before flight practice

so that in the event of a crash while learning to fly the Phantom the Zenmuse H3-3D will not be

damaged. Please refer to the Zenmuse H3-3D operator manual for detailed installation and

removal procedures. The images and directions below are only supplemental to the manuals

found on the DJI website.

Only the lower half of the gimbal is attached and secured in place via the rubber tension

grommets, which have a lip that fits into the bracket rings. While these provide enough tension to

retain the gimbal during flight they can come loose if the craft is involved in a significant crash.

The grey/black ribbon cable will be the only connection to the craft for power and video. This

cable can be disconnected and reconnected at will after the lower half is removed from the

brackets.

• To disconnect your gimbal, pinch the rubber tension grommets and pull out of the top plate.

• Disconnect the ribbon cable from the gimbal by firmly pulling it out of the back of the gimbal. It is

recommended that you

disconnect the gimbal cable

before performing any

firmware updates. Failure to

do so can result in damage

to your gimbal.

• To reconnect your gimbal,

pinch the rubber tension

grommets back into place

and reattach the ribbon

cable.

• Be sure to attach the anti-

drop pins before flying with

your gimbal installed.