DSO Nano V3 Panduan Pengguna - Halaman 12

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Peralatan Uji DSO Nano V3. DSO Nano V3 15 halaman.

signal parameters that need analysis, e.g. Freq(frequency), Duty(dutyfactor), Vpp(peak-to-peak voltage)etc., the

measured value will be displayed at the lower right corner of the screen, as shown in the image below:

2. 2. 2. 2. Example

Example

Example Two

Two

Two： Measure

Measure

Measure with

Measure

A cursor can be used to measure the time and voltage of the waveform very quickly.

（1）Measure the cycle of signal source

Please operate according to the following steps:

�Use "▲" or "▼" to choose Yn items in Measurement Area.

�Press "M"

�Use "◄" or "►" to choose CursorV1

�Use "▲" or "▼" to adjust the position of CursorV1 to the crest.

�Use "◄" or "►" to choose CursorV2

�Use "▲" or "▼" to adjust the position of CursorV2 to the valley.

And get：△V=1.00mS i.e. the cycle of signal source. As shown in the image below:

All manuals and user guides at all-guides.com

with

with C C C C ursor

with

ursor

Measured value