ATSS ACTIVE 108 Panduan Pengguna - Halaman 6
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Sistem Keamanan ATSS ACTIVE 108. ATSS ACTIVE 108 10 halaman.
Halaman Cetak
USER MANUAL
DON'T FORGET
Once you have Armed the Zones, after 60 seconds delay time,
you will hear a confirmation siren sound for few seconds
acknowledging that Zones have been Armed properly.
Disarm the
To Disarm the Zones insert key and change it to OFF
Ÿ
position
Notes to
To Activate panel Tamper J16 remove the jumper J14.
Ÿ
When the siren time jumper STD is shorted, the siren
Ÿ
rings for 15 minutes.
When the siren time jumper STD is open, the siren rings
Ÿ
for 30 minutes.
When the Zone 1 delay time jumper ZT1 is shorted, Zone
Ÿ
1 siren rings after 30 seconds.
When the Zone 1 delay time jumper ZT1 is open, Zone1
Ÿ
siren rings after 60 seconds.
Zone 2 siren will start ringing immediately when Zone 2 is
Ÿ
opened
When Tamper is released siren rings.
Ÿ
Once you open Zone 1 Deactivate the system before delay
Ÿ
time
...onfirmation alert
...system
...remember
ACTIVE 1O8