3nStar BC1005 Panduan Teknis & Servis - Halaman 3
Jelajahi secara online atau unduh pdf Panduan Teknis & Servis untuk Penghitung Uang Tunai 3nStar BC1005. 3nStar BC1005 8 halaman. Bill counter
Juga untuk 3nStar BC1005: Panduan Teknis & Servis (12 halaman)
Halaman CetakE30
1. Please make sure there is no object covering the sensor.
2. Please check if stacker sensor's plugs (a pair) are all well connected to
mainboard?
3. If it is well connected, please change the one by one using normal sensor and
check if it can work.
4. If all sensors are changed but still not working, please change the mainboard.
E29
1. Please make sure there is no object covering the sensor and not to be put
under direct strong light.
2. Please check if hopper sensor's plug is well connected to mainboard?
3. If it is well connected, please change with normal sensor and check if it can
work.
4. If all sensor is changed but still not working, please change the mainboard.
ALARM CODES:
E17
1. Suspicious fake notes detection by UV method.
2. Real banknote which had been washed might also caused E-17.
3. If note is real, UV sensor might be damaged, change UV sensor.
4. If note is real, mainboard might be damaged.
E18
1. Suspicious fake notes detection by MG method.
2. Real banknote which had been washed or has the magnetic thread damaged
might also caused E-18.
3. If note is real, MG sensor might be damaged, change MG sensor.
4. If note is real, mainboard might be damaged.
E11
1. Double notes that are stick together might caused E11.
E23
1. Check hopper setting, might need to tighten the hopper screw.
E22
1. Make sure banknotes are in order when feeding, do not tilt the banknotes.
2. Check feeding rollers, make sure 3 rollers on the left & 3 rollers on the right
have the same pulling power.