DSPPA D6573 Manual - Halaman 4

Jelajahi secara online atau unduh pdf Manual untuk Peralatan Perekaman DSPPA D6573. DSPPA D6573 4 halaman. Digital feedback suppressor

be copied to the other, that is, if the user presses CHL button before he/she presses CHR button,

parameters of the left channel will be copied to the right channel.

(6) BYPASS may be used to bypass all feedback suppression filters.

(7) STORE button. The user may use the STORE button to save any modification to the preset value. Please

note that the user needs to press the button twice continuously to save the parameters before the saving

prompt disappears.

Rear Panel:

(1) INPUT LEVEL, input level adjusting knob. The device can be adapted to different working levels through

the toggle switch, and you can choose +4dBu or -10dBV.

(2) ANALOG INPUT. This product has XLR or TRS input jacks, and each group of XLR and TRS jacks is

connected in parallel, and can be used for balanced or unbalanced connections.

(3) ANALOG OUTPUT. This product has XLR or TRS output jack, and each group of XLR and TRS jacks is

connected in parallel, and can be used for balanced or unbalanced connections.

(4) Power socket. Before connecting the device to the power source, please make sure that the displayed

voltage corresponds to your local mains power supply. Please note that a fuse of proper type and rated

value should be installed in this device on the basis of the power supply voltage required by this device

(Please refer to section 4.1 "Specifications"). Please connect the device to the mains power supply with

the enclosed power cable.

(5) RS232 interface for firmware upgrade.

www.dsppacs.com

The specifications will be subject to change without prior notice.