ATTEMA FTTX Buku Petunjuk - Halaman 3

Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Unit distribusi daya ATTEMA FTTX. ATTEMA FTTX 6 halaman. Distribution closure

START

1 meter

Instruction manual Civil V1.0 _ XX-09-2020 _ FttX-Distribution Closure AT29030 _ Page 3 of 6

7. Push the foam seals under the hooks on both

sides of the base plate.

Pay attention!

Do this by sliding the sealing

rubber A from the inside to the outside.

8. Make sure the entire bundle is

enclosed by the foam seal.

9. Bundle the drop cables at the "start point"

using one of the Velcro strips provided.

Pay attention!

1 meter of extra drop cable /

duct is required to make the loop.

10. Bundle the drop cables / ducts together every

1 meter using the Velcro strips provided.

Fit the specified seal caps to every drop

Cable / ducts.

TIP: Slide the coding / labels up to 1.5 meters

from the end of the customer cables / ducts.

11. Place the foam strips (B) over the base

plate's hooks.

Pay attention!

All 4 ports must now be

sealed with the foam seals A + B.