Atten AT-2233 Panduan Pengguna - Halaman 6

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Alat Listrik Atten AT-2233. Atten AT-2233 9 halaman.

Bending plastic pipes and sheets.

Soldering plumbing joints, tin, special silver solder, SMD elements, cable

lugs.

Loosening rusted or tightly fastened nuts and bolts.

Removing old and even thick coatings of oil paint , lacquer, varnish and

synthetic plaster.

If you are not sure about the correct setting, start with a low temperature setting

and gradually increase the temperature until you achieve optimum results.

7.1 Mounting the correct accessory

Icon

Description

Glass protection nozzle

Cone nozzle

Fish tail surface nozzle

Scraper

Make sure that the tool is switched off and the nozzle has cooled down.

Touching a hot nozzle can lead to serious burns .Before attaching or replacing a

nozzle, allow the unit to cool down completely or use a suitable tool.

An incorrect or defective nozzle can lead to heat accumulation and damage the unit.

Use only original nozzles according to the table that are suitable for your unit.

(if applicable)

Purpose

Protection windows when

stripping frames

Soldering pipes

Welding, shrink sleeving (heat

concentrated over small area )

Drying, thawing (heat spread over

wider area )

Stripping paint and varnish