Attero Tech AXON A4FLEX Panduan Pengguna - Halaman 6

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Aksesori Attero Tech AXON A4FLEX. Attero Tech AXON A4FLEX 13 halaman. Networked audio connectivity interface

Halaman Cetak
2

Product Installation

2.1 - Mounting

The A4FLEX has provides flexible mounting options:
Unit Surface Mounting– The A4FLEX is supplied with two "L"-
o
shaped mounting brackets that can be attached to either side
of the unit. Once fitted, these brackets can be used to secure
the A4FLEX to any a flat surface. The brackets can be fitted
with the flange facing up or down which allows the unit to be
fitted under a desk for example.
2 - Under Table Surface Mounting
Installation Mounting Template
An installation mounting template is provided to simplify the
process
of
installing
configuration.
These templates can be
downloaded
Rack Mounting – The A4FLEX is a 1/3 rack width device and
o
1RU high. It can be mounted into a rack using the rack tray
accessory (sold separately ). The accessory tray can hold up
to three 1/3
rack width AXON units.
rd
When used with the rack shelf, the A4FLEX is attached to the
tray with mounting screws installed through its base. The "L"
brackets are then used as the rack ears by installing them to
the side flanges of the tray.
3 - Rack Mount Tray
the
A4FLEX
in
surface
here.
1315 Directors Row Suite 107 Fort Wayne, IN 46808 ⁞ (260)496-9668 ⁞ www.atterotech.com
Tray Surface Mounting
o
The tray accessory may also be installed in a surface
mount orientation. In this configuration, brackets are
installed along the upper lip of on the sides of tray,
allowing it to be mounted on any flat surface thus allowing
multiple units to be installed easily on a wall or under a
table too.
4 - Tray Surface Mounting Configuration
*Note: Complete CAD drawings can be downloaded from
the Attero Tech website. Please contact Attero Tech for any
further product related information that is not accessible
on the website.
mount
Page 2