Attero Tech SquawkBox Panduan Pengguna - Halaman 9

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Aksesori Attero Tech SquawkBox. Attero Tech SquawkBox 20 halaman.

SquawkBox

User Manual

3.4 – Load/Save Settings

In order to ease configuration of multiple SquawkBox devices, the settings may be

saved and that saved configuration then loaded into other SquawkBox devices.

Once all the parameters have been set correctly, the complete configuration can be

saved by clicking the Save button at the top of the form (as shown in Figure 4).

The Configuration Save dialog will appear allowing you to select a folder and a file

Figure 4 - Save/Load Buttons

name. Clicking on OK will save the configuration using the chosen filename in the

chosen location. The filename will, by default, use a .DCF extension.

To load a previously saved configuration, click the Load button. The Load Configuration dialog will appear so the desired

configuration file can be located. Locate and select the file to be loaded and click OK. A confirmation message will then be

shown as a reminder that the current device configuration will be overwritten. Click "Yes" to continue.

*Note: The saved configuration is very device specific so only SquawkBox configuration files can be loaded into a

SquawkBox. The revision of SquawkBox firmware is also taken into account. A warning will be shown and the file will not be

loaded if either the device type or the firmware revision does not match the device being set up.

Attero Tech LLC 2014

Page 5

614-00007-04