Attero Tech unDIO2x2 Panduan Pengguna - Halaman 6

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Aksesori Attero Tech unDIO2x2. Attero Tech unDIO2x2 17 halaman. 2-in/2-out dante interface
Juga untuk Attero Tech unDIO2x2: Panduan Pengguna (16 halaman)

Halaman Cetak

1. Ip Address Setup

2 – Device Installation

Power LED

Power Socket – Use with optional 12 V DC wall wart only

Dante® Ethernet interface connector and indicators

2 x Balanced audio inputs

2 x Balanced Audio outputs

*Note: The unDIO2x2 has a label on one of the mounting flanges that shows the last 6 digits of the MAC address. This

is important for initial device identification as these digits make up part of the devices default network name that is

shown when the device is detected by Dante Controller. The full MAC address is also given on the bottom of the unit.

Page 5

unDIO2x2

User Manual

614-00013-05