Attero Tech unHX2D Panduan Pengguna - Halaman 13
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Peralatan Perekaman Attero Tech unHX2D. Attero Tech unHX2D 18 halaman. Dante-enabled hdmi audio de-embedder/embedder
Halaman Cetak3.3 – Status LEDs
The front panel of the unHX2D features 8 bicolor LEDs used to indicate various device information and status. Some of
these indications may occur simultaneously.
Front Panel Status Indicator
Attero Tech LLC 2018
LED State
Power LED flashing Green
continuously
SYS / ERROR / SYNC LEDs
flash green, on and
Power LED stays red
continuously after boot
ERROR status LED stays
red
ERROR status LED stays
amber
SYNC LED is lit amber
SYNC LED is lit red
SYNC LED is lit green and
steady on
Page 13
Function / Status
Identify feature has been activated remotely.
This is feature is used to help the installer identify the
device on the network.
Find Unit feature has been remotely activated.
This is feature is used to help the installer identify the
device on the network. Automatically reverts back to
normal operation after 8 seconds.
A critical error has occurred.
Try power cycling the device, if the problem persists
contact Attero Tech technical support.
A critical Dante processor failure has occurred.
Try power cycling the device, if the problem persists
contact Attero Tech technical support.
The Dante firmware has become corrupt.
Try power cycling the device. If the problem persists,
try updating the device firmware. Contact Attero Tech
technical support if the problem remains.
The unHX2D is synchronizing its Dante clock.
Loss of clock synchronization, analog outputs are
automatically muted.
Clock is synchronized and slaved to an external Dante
device.
unHX2D
User Manual
614-00038 Rev 01_a