Attero Tech unHX2D Panduan Pengguna - Halaman 5

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Peralatan Perekaman Attero Tech unHX2D. Attero Tech unHX2D 18 halaman. Dante-enabled hdmi audio de-embedder/embedder

Halaman Cetak
1 – Overview
The unHX2D is a Dante
enabled HDMI de-embedder/embedder designed to bridge 2-channel PCM HDMI audio to/from
TM
a Dante audio network. In addition, the unHX2D includes two line level analog inputs and outputs that can be
independently bridged to/from a Dante audio network and/or the HDMI.
The unit comes in a small form factor with integrated mounting brackets allowing it to be mounted discretely in small
spaces (such as under desks) close to the sources or sinks, thus reducing the amount of cabling that may be required.
Audinate's Dante Controller or other 3rd party manufacturer's Dante routing software can be used to control the Dante
audio routing configuration of the device while the Attero Tech unIFY Control Panel application can be used to configure
the device-specific features.
1.1 – Extended Features
Delay - An adjustable 400ms audio delay buffer is included on the Dante output for audio and video lip sync.
o
Mixing - Flexible stereo matrix audio routing between system input sources and outputs and facilitates bridging
o
audio from either video sources or monitors to a Dante network.
HDMI Repeater – The HDMI output operates as a pass thru HDMI 2.0 compliant (HDCP 2.2) repeater of a HDMI
o
input video source, capable of up to 4K, 4:4:4 video.
EDID Management – Installer adjustable EDID management settings via software.
o
SPDIF Output – Unlike the other outputs that can have a mix of audio, the SPDIF output is locked to the audio
o
from the HDMI input stream only.
SPDIF Input – This input can be routed to Dante, re-embedded to the HDMI output.
o
3
Party Control – The unHX2D also supports control by third party systems allowing external configuration of
o
rd
its settings such as input sensitivity, internal source routing, EDID management and status monitoring in real
time. Further information on 3
API documentation at
 Attero Tech LLC 2018
Figure 1 – unDHX2D front and back
party control and software tools can be found by downloading the supporting
rd
https://www.atterotech.com/registered-downloads/.
Page 5
unHX2D
User Manual
614-00038 Rev 01_a