Attero Tech unD3IO Panduan Pengguna - Halaman 5

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Sistem I/O Attero Tech unD3IO. Attero Tech unD3IO 17 halaman. 2-in/2-out dante wallplate with multi-io analog connectivity

Halaman Cetak

1 - Overview

The unD3IO Dante
Audio interface is a cost effective multi-IO wall box and is designed to fit into most dual gang US
junction boxes. Its size and I/O density make it easy to put Dante connectivity wherever it's needed – near the audio
source or sink – thereby eliminating costly and interference prone analog wiring.
The unD3IO features two Dante input and two Dante output channels. The analog I/O are configurable via software to
support different connectivity configurations. The XLR connector provides balanced mic/line audio to Dante output
channel 1. However, the second Dante output comes from one of three possible input mixes:
A mono mix of the RCA jack inputs
o
A mono-mix of the 3.5mm stereo jack inputs
o
A combined mix of the RCA inputs and the stereo jack inputs
o
The user can select which mix they require through the control software.
The unD3IO has two output options. An XLR connector provides a balanced line output for analog output 1 only, and a
3.5mm stereo jack connector provides an unbalanced line level output for both analog output 1 and analog output 2.
Both output connectors may be used simultaneously.
Connection to the Dante network is provided by a single Ethernet RJ45 connector on the back of the unit. The unD3IO
is PoE-enabled which allows it to be powered over its network cable from a suitable PoE source (IEEE 802.3af-compliant)
and eliminating the need for a local power supply. This is particularly useful as the unD3IO can then be mounted in
remote locations where access to a mains outlet would be limited or indeed, non existent.
Audinate's Dante Controller or other 3rd party manufacturer's Dante routing software can be used to control the audio
routing configuration of the device while the Attero Tech unIFY Control Panel application can be used to configure the
device-specific features.
The unD3IO also supports control by third party systems allowing external configuration of its settings such as
phantom power and input gain in real time.
document in section 4.
1.1– What's in the Box
The unD3IO comes supplied with the following
unD3IO device
o
Mounting kit
o
Decora plate
o
Dante is a trademark of Audinate Pty. Ltd.
 Attero Tech LLC 2018
Figure 1 - unD3IO front view
Further information on 3
Page 4
User Manual
party control can be found later in this
rd
614-00017 Rev 05_a
unD3IO