3onedata ES5026 Panduan Pengguna - Halaman 13

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Beralih 3onedata ES5026. 3onedata ES5026 20 halaman. Gigabit managed poe switch

5.4.2 Management Account

Users can register new user name and password or reset password in this page. It will automatically jump to login

interface after the register or reset finished. The user can login in with new user name.

Notice: Remember your user name and password.

You can choose from two port configurations: Enable and Disable. Click "Enable" to open the port, click

"Disable" to close the port, the default setting is "Enable".

There are 5 types of port modes for choosing, they are 10Harf,10Full,100Harf,100Full, auto-negotiation. Default

port mode is auto-negotiation, please change modes in pull-down list. The flow control function of system is

closed in default resetting, open it when needed.

The Bandwidth Page allows user to define the bandwidth settings for specified egress and ingress interfaces. The

user can limit maximum burst ingress flow, the port flow control function works when the bandwidth limit is

exceeded. The flow control settings include "Enable" and "Disable", default setting is "Enable". Default flow rate

is not limited, user can reset the flow rate between

Picture 5.4.2.1 Account Management

Picture 5.4.3.1 Port Config

Picture 5.4.4.1 Bandwidth Allocation

0Kbit/sec -1048544Kbit/sec.

User manual