DSS NETWORKS 5160 Manual - Halaman 13

Jelajahi secara online atau unduh pdf Manual untuk Pengontrol DSS NETWORKS 5160. DSS NETWORKS 5160 18 halaman. Gigmac pmc/pci controllers

GigMAC PMC and PCI

Controller and Driver Users Manual

Step 1 - Once the hardware is installed, reconnect the power and network cables

and turn on the power to the computer.

The Hardware Wizard will detect the card. Click the Next> button to continue

Installation and proceed to Step 2 below. If the Wizard does not detect the card,

please goto to Control Panel->Add/Remove Hardware. Click Next> and select

Add/Troubleshoot Device. At this point the system may find your device or you

may have to select it manually from the list. Then select Update Driver.

Step 2 - The Hardware Wizard will search for new software for the hardware it

has detected. Click Next> to continue installation.

Step 3 - The Hardware Wizard will ask you what you wish to do. Click Next> to

accept the Recommended option and continue installation.

Step 4 - The Hardware Wizard will ask where you wish to search for drivers.

Click the "Specify a location" option. Insert the DSS Networks GigMac Gigabit

Ethernet Adapter CD. Click Browse and select the CD. Select the appropriate

Windows directory and Click Next to continue.

Step 5 - The Hardware Wizard will find the driver and list the path to the INF file.

Click Next to continue installation. If the Wizard indicates more than 1 possible

driver, please make sure you have selected the one from the installation CD.

Step 6 - The Hardware Wizard will ask you to configure Advanced Features for

your adapter. For most users, the default settings are sufficient. Click OK to

accept the default settings.

Step 7 - The Hardware Wizard may

ask you to insert your Windows 98,

Windows 2000 or Windows Me CD and then click OK. One Windows 2000, this

step may not be necessary as all of the necessary files may be on your hard

disk. If needed, insert the Windows CD and Click OK. The Hardware Wizard may

copy files from the Windows CD.

Step 8 - The Hardware Wizard will finish installing the adapter software. Click

Finish to continue the installation.

Step 9 - The Hardware Wizard may will ask you to restart your computer. Click

Yes to reboot your computer and complete your installation. The installation of

your DSS Networks GigMac Gigabit Ethernet Adapter is now complete.

4. TESTING AND VERIFICATION

There are several ways to test your adapter on vxWorks, Linux and Windows

platforms. This section provides suggestions on how you may test and verify your

DSS NETWORKS, INC

Version: 1.12

Page: