DStv A6 Panduan Pengguna - Halaman 9
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Kontrol Jarak Jauh DStv A6. DStv A6 13 halaman. Dstv remote
Juga untuk DStv A6: Panduan Pengguna (10 halaman)
Halaman Cetak
If the
B
IMPORTANT
The DStv Explora must be set up to "listen" for the correct mode. You can do this in DStv Central.
•
Press the DStv button
•
Go to "Settings"
•
Select System Settings
•
Select Remote Control
•
If the remote is set to mode 1, set mode 2 and 3 to Ignore.
If the remote is set to mode 2, set mode 1 and 3 to Ignore.
•
•
If the remote is set to mode 3, set mode 1 and 2 to Ignore.
If your DStv Explora is connected to another decoder using XtraView, please consult with your
DStv Accredited Installer for remote mode settings.
DStv Remote (A6 model)
About the Remote Modes
green
lights blink below both i and B
To set the remote to mode 3: press and hold both the i and
A
CK buttons for 3 seconds or until you see the
1 and 2 (below the i and B
A
CK, the remote is in mode 3.
green
light blink on
A
CK buttons).
7