aTTo Digital LightREC Panduan Pengguna - Halaman 2

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Perekam Suara aTTo Digital LightREC. aTTo Digital LightREC 7 halaman. Voice recorder

Slide the "ON/OFF" button to "ON" (to the side of the device) to start recording – a red

LED will light for 5 seconds; then a blue light will blink 5 times to confirm recording

mode, after which the LED will turn off and remain off during the recording.

One Button Recording

Press "Mode" button to shift between recording modes. The device comes in preset

"continuous mode". Check the blue light to confirm recording mode as in continuous

mode the light blinks slower than in voice activated mode.

To stop recording just slide the "ON/OFF" button to the "OFF" position (toward the

"Mode" button). The LED indicator light will blink once to confirm the lightREC

stopped recording and saved the audio file automatically.

Playback

Make sure the device is OFF before connecting it to your computer to playback

recordings. To access the audio files, go to the folder "RECORD" and select the file you

want to listen to. We recommend using VLC player or BS player to playback recordings.

INSTRUCTIONS

OFF

Mode Button