DT Research DT3 5 Series Panduan Pengoperasian Dasar - Halaman 3
Jelajahi secara online atau unduh pdf Panduan Pengoperasian Dasar untuk Tablet DT Research DT3 5 Series. DT Research DT3 5 Series 4 halaman. Mobile tablet
Juga untuk DT Research DT3 5 Series: Panduan Pengoperasian Dasar (4 halaman)
Halaman Cetak
DT365
OPERATION
Internal Battery
!
Warning!
The Internal battery pack should only be replaced by an authorized DT Research service
representative. Please contact your product and/or service provider for internal battery
replacement service.
Powering ON and OFF
To activate the Tablet Modules basic, push and quickly release the Power Button. The
display will come on in a few seconds. To put the DT365 in Standby mode, push and
quickly release the Power Button. To turn the DT365 off for extended storage, power off
safely using any software function that "shuts down computer" provided in the software
operating system.
NOTE:
The battery packs shipped with your tablet may be low in power—please use
the AC-DC adapter with the DT365 when setting up for the first time to fully
charge the internal battery pack. You may charge the external battery pack with it
attached to the DT365, or with the optional external battery charger kit.
NOTE:
When the battery pack(s) is (are) charging, the blue-colored Battery LED should
blink slowly. If plugging in the AC-DC adapter does not trigger this blinking
activity and the LED stays dark, the battery pack(s) may have been drained
substantially. Try unplugging/ replugging the AC-DC adapter to the DT365 a few
times to activate the charging process.
NOTE:
To conserve power, use (push and quick release) the Power Button to put the
tablet in "Standby" mode while not in use. Pushing briefly on the same button
will wake up the system within seconds.
NOTE:
Avoid using the Power Button ("hold 4+ seconds" feature) to turn off the
tablet—this form of hardware shutdown is intended to be a means of recovery
from lockups, and not as normal operation.
4
ENGLISH
Start Up
If the power up (from Standby or otherwise) is successful, the appropriate interface will
be displayed after a launch sequence of several seconds. The wireless LAN connection
may take 10-15 seconds to be established.
Configuring the Mobile Tablet
The DT365 may be configured using the utilities and methods dictated by the software
operating system. The DT365 should be configurable for various properties such as user
profiles, network features, and several system elements.
Wireless Networking
Wireless LAN
The DT365 is often delivered with an embedded (user-inaccessible) 802.11a/b/g/n WLAN
adapter equipped with a hidden custom antenna.
• hrough the support of typical WLAN adapters, the DT365 should be able to detect
T
all 802.11 access points in the vicinity for you to select the access point of your
choice for connection.
• he SSID and WEP/WPA/WPA2 (if enabled) parameters on the DT365 and the access
T
points have to match. The SSID is case-sensitive and it is recommended that you
enable WEP/WPA/WPA2 encryption (or advanced alternatives) for secure access.
•
W
hen WEP/WPA/WPA2 is enabled, you may need to consult your network admin-
istrator or your networking equipment literature to properly configure associated
settings such as Authentication mode, etc.
• efer to the access point operating manuals for setting up the 802.11 access points.
R
5
ENGLISH