DT Research DT301A Panduan Pengoperasian Dasar - Halaman 4

Jelajahi secara online atau unduh pdf Panduan Pengoperasian Dasar untuk Tablet DT Research DT301A. DT Research DT301A 10 halaman. Mobile pos tablet

DT301A

OPERATION

Internal Battery

Warning

The Internal battery pack should only be replaced by an authorized DT Research service representative.

Please contact your product and/or service provider for internal battery replacement service.

Powering ON and OFF

To activate the DT301A, push and quickly release the Power Button. The display will come on in a few

seconds. To put the DT301A in Standby mode, push and quickly release the Power Button. To turn the

DT301A off for extended storage, power off safely using any software function that "shuts down computer"

provided in the software operating system.

NOTE:

The battery packs shipped with your tablet may be low in power—please use the AC‐DC

adapter with the DT301A when setting up for the first time to fully charge the internal battery

pack. You may charge the external battery pack with it attached to the DT301A, or with the

optional external battery charger kit.

NOTE:

When the battery pack(s) is (are) charging, the blue‐colored Battery LED should blink slowly. If

plugging in the AC‐DC adapter does not trigger this blinking activity and the LED stays dark,

the battery pack(s) may have been drained substantially. Try unplugging/ replugging the

AC‐DC adapter to the DT301A a few times to activate the charging process.

NOTE:

To conserve power, use (push and quick release) the Power Button to put in "Standby" mode

while not in use. Pushing briefly on the same button will wake up the system within seconds.

NOTE:

Avoid using the Power Button ("hold 4+ seconds" feature) to turn off the tablet—this form of

hardware shutdown is intended to be a means of recovery from lockups, and not as normal

operation.

ENGLISH