DT Research DT301C Panduan Pengoperasian Dasar - Halaman 3
Jelajahi secara online atau unduh pdf Panduan Pengoperasian Dasar untuk Tablet DT Research DT301C. DT Research DT301C 4 halaman. Rugged tablet
Juga untuk DT Research DT301C: Panduan Pengoperasian Dasar (4 halaman)
Halaman Cetak
OPERATION
Powering ON and OFF
To activate the DT301C/ DT301T, push and quickly release the Power Button. The display will
come on in a few seconds. To put the DT301C/ DT301T in Standby mode, push and quickly
release the Power Button. To turn the DT301C/ DT301T off for extended storage, power off
safely using any software function that "shuts down computer" provided in the software
operating system.
NOTE:
The battery pack shipped with your tablet may be low in power. Please use the
AC-DC adapter with the DT301C/ DT301T when setting up for the first time to
fully charge the battery pack, or use the optional battery charger kit.
NOTE:
When the battery pack is charging, the blue-colored Battery LED should blink
slowly. If plugging in the AC-DC adapter does not trigger this blinking activity and
the LED stays dark, the battery pack may have been drained substantially. Try
unplugging/ replugging the AC-DC adapter to the DT301C/ DT301T a few times to
activate the charging process.
NOTE:
To conserve power, use (push and quick release) the Power Button to put the
tablet in "Standby" mode while not in use. Pushing briefly on the same button
will wake up the system within seconds.
NOTE:
Avoid using the Power Button ("hold 4+ seconds" feature) to turn off the
tablet—this form of hardware shutdown is intended to be a means of recovery
from lockups, and not as normal operation.
4
ENGLISH
Start Up
If the power up (from Standby mode or otherwise) is successful, the appropriate interface
will be displayed after a launch sequence of several seconds. The wireless LAN connection
may take 10-15 seconds to be established.
Configuring the Mobile Tablet
The DT301C/ DT301T may be configured using the utilities and methods dictated by
the software operating system. The DT301C/ DT301T should be configurable for various
properties such as user profiles, network features, and several system elements.
Wireless Networking
Wireless LAN
The DT301C/ DT301T is often delivered with an embedded (user-inaccessible) 802.11ac
WLAN adapter equipped with a hidden custom antenna.
• hrough the support of typical WLAN adapters, the DT301C/ DT301T will detect
T
802.11 access points in the vicinity for you to select the access point of your choice
for connection.
• he SSID and WEP/WPA/WPA2 (if enabled) parameters on the DT301C/ DT301T and
T
the access points have to match. The SSID is case-sensitive and it is recommended
that you enable WEP/WPA/WPA2 encryption (or advanced alternatives) for secure
access.
•
hen WEP/WPA/WPA2 is enabled, you may need to consult your network admin-
W
istrator or your networking equipment literature to properly configure associated
settings such as Authentication mode, etc.
• efer to the access point operating manuals for setting up the 802.11 access points.
R
5
ENGLISH