DT Research DT135BT Panduan Pengoperasian - Halaman 2
Jelajahi secara online atau unduh pdf Panduan Pengoperasian untuk Pengontrol DT Research DT135BT. DT Research DT135BT 2 halaman. Embedded controller/system
Halaman Cetak
DT135BT
Precautions
•
Always exercise care when operating and handling the DT135BT.
•
Never disassemble any portion of the enclosure as this will void any product warranty on the
DT135BT.
•
Do not use any AC/DC adapter other than the one provided with the DT135BT or acquired from
the manufacturer or its partners.
•
In the unlikely event that smoke, abnormal noise, or strange odor is present, immediately power
down the DT135BT and disconnect all power sources.
•
Please report the problem to your device provider immediately.
The DT135BT
Front View
A
A
Audio jack
Power button
B
C
DC-in
3840 x 2160 @ 24Hz
D
HDMI (A1)
1920 x 1080 @ 60Hz
2
ENGLISH
Rear View
B
C
D
E
F
G
3840 x 2160 @ 24Hz
E
HDMI (A2)
1920 x 1080 @ 60Hz
F
Ethernet port
G
USB 3.0 port
USB 2.0 port
H
Powering ON and OFF
The Power Button is located in the front of the DT135BT. The Power Button may be configured to
function differently depending on the power options of the operating system. In general, to turn the
DT135BT on, push and release the Power Button on the front bezel. The power LED will be lit (blue)
and the corresponding interface will be displayed on the display monitor.
To turn off the device, again depending on software operating system, push and release the Power
Button or use a software shutdown interface. In the event of system lockup, the Power Button may
be used to perform a reset on the device. To do that, push and hold the Power Button for at least 4
seconds. The system will shut down and all unsaved work may be lost. Pushing on the Power Button
again will restart the device.
Device Ports
The DT135BT features an optimal set of I/O ports while preserving the compact size of the system.
The HDMI connectors, network (10/100/1000 BaseT Ethernet), and power ports are supplemented
by a set of USB (2) and audio (1) ports. Through its USB ports, the DT135BT supports a wide range
of USB-based peripherals, applicable in providing the means for software installation, application
storage, data storage, and system software recovery and updates.
Memory and Storage
H
The DT135BT may be available in storage configurations ranging from 32GB to 512GB Flash.
Depending on base software configuration, the user may use the internal memory of the DT135BT
for user's installed software and storage. The user may also supplement storage space with USB-
based peripherals such as flash disks. RAM capacity is from 4GB to 8GB.
3
ENGLISH