DT SWISS RATCHET EXP Panduan Teknis - Halaman 15

Jelajahi secara online atau unduh pdf Panduan Teknis untuk Beralih DT SWISS RATCHET EXP. DT SWISS RATCHET EXP 20 halaman.
Juga untuk DT SWISS RATCHET EXP: Panduan Pemeliharaan (13 halaman)

Halaman Cetak

4. Clamp the mounting / dismounting tool for

the threaded ratchet into the vice.

5. Put the hub on the tool in the vice.

6. Put the installation cylinder onto the

bearing.

7. Tap in the bearing carefully with slight

hammer strokes.

8. Check the bearings.

→ It must be possible to turn the hub with

slight resistance.

→ The hub must not have axial play.

9. Tap the bearing on the non drive side in or

out and repeat previous steps until the hub

is turning smoothly.

Ratchet EXP - Technical Manual

HXTXXX00N5314S /

HXTXXX00N5025S

HXTXXX00N8387S